Extreme PSI :: Cooling :: Water and Methanol Kits :: Snow Performance Stage 2 Boost Cooler Kit: Subaru WRX & STi Specific Kit *SALE!*

Follow us:
FacebookTwitterInstagramLinkedinGoogle PlusYoutube

Snow Performance Stage 2 Boost Cooler Kit: Subaru WRX & STi Specific Kit *SALE!* #20543

Snow Performance Stage 2 Boost Cooler Kit: Subaru WRX & STi Specific Kit *SALE!* #20543

Snow Performance Stage 2 Boost Cooler Kit: Subaru WRX & STi Specific Kit *SALE!*
 
(0 reviews)  

Why Choose the Boost Cooler™ by Snow Performance?

Take a look and see why the Snow Performance Boost Cooler™ is your best choice in water/methanol injection.

1. Engineering – Each system has been designed and tested by engineers to ensure reliability and robustness. The Boost Cooler™ will do what it should do for a long time. No failure prone brass, or rubber, is used as the others and our component flow rates are calculated and spec’ed to work with each other.

2. Digital Variable Controllers for different applications – Not just boost actuated, we have specially designed controllers for each vehicle/application to ensure maximum power. Unlike the others, most of our controllers feature true 2D maps facilitating the most correct injection and power under all conditions for the most advanced systems available.

3. High Pressure/ High volume Pumps – Our pumps are specially designed exclusively for Snow Performance to deliver higher pressures and reliability. Features include: higher pressure (150-180+ psi), self priming, integrated check valve, and thermal protection for safety. Each pump is pre-tested and designed to work with methanol unlike some of the others that use off the shelf agricultural pumps.

4. Unsurpassed Atomization – Along with higher pressures, our nozzles are specially designed to spin the fluid supersonically before forcing through a venture-shaped orifice for the best atomization available. Better atomization means more power.

5. Trained technical and tuning advice – trained, knowledgeable technicians are always available to help you. We have more data and hands-on experience with diesel and gasoline applications than anyone so you don’t have to guess.

6. Warranty – Life time warranty available. Snow backs it’s systems with industry leading warrantees. Compare this to the others 1-year limited warranty.

7. Safety – Our new SafeInjection™ (patent pending) is the ultimate in safety for even the most aggressively tuned applications. This ensures worry-free power in even the most demanding racing applications as well as full power on the street.

8. Proven Performance – All our systems are backed with dyno data proven by numerous magazine articles and more World Records than anyone. Buy the same kit the pros and championship race teams use – buy the Boost Cooler™.

9. Complete kit – When you buy a Boost Cooler™, you get a complete kit right down to the reservoir and tap. Also, we have more kits for specific applications than anyone. Eliminate the guess work - get a kit for your vehicle complete with installation instructions that include vehicle specific photos and performance backed-up with dyno charts.

For Subaru WRX’s and STi's utilizing the stock 0-5 volt output MAF sensor. The Digital Variable Control unit proportionally injects more or less water-methanol according to input signals from the mass air flow sensor. More power over a wider range and better drivability is the result. 20% increases in Horsepower typical.

Kit includes:
• Digital MAF referenced controller
• 150+ psi pump for the most in pressure and volume
• Bulkhead fitting required to tap into factory washer reservoir or factory trunk mounted intercooler sprayer reservoir
• 20 feet of tubing
• 2 nozzles to cover a wide range of horsepower
• All required hardware needed for installation
• WRX/STi specific instructions for ease of installation

*Note: It is recommended that a Solenoid Upgrade (#40060) be used in any application that utilizes a trunk mounted reservoir.

*Note: This kit is recommended for vehicles running factory size or fast spooling turbochargers. Because boost on smaller turbo applications build rather quickly, airflow is still very progressive and works best with this kit as it also injects progressively. Customer with larger turbochargers that spool slower should purchase "MAP" kit.

*Note: Kit does not include 2qt. reservoir bottle, this kit requires you to tap into the factory front mounted washer reservoir or factory STi rear mounted intercooler sprayer tank. Subaru WRX/STi customers wishing to run the 2qt. reservoir bottle should purchase the standard "MAF" kit.

5%
Details
 
Ships in 24 hours
SKU SP-20011WRX
Retail price: $484.16
Our price:
$459.95
Want this item shipped on October 22? Order within the next 57 hrs 57 mins.
Quantity

Related products

Snow Performance Solenoid Upgrade
Availability
Ships in 24 hours
SKU SP-40060
Our price: $59.99
 
Quantity   


 

Price match request form

Have you seen this product at a lower price elsewhere? If so, please give us a chance to match or beat it! We will respond to your request promptly!
Your Name: *
Email: *
Phone:  
Competitor's Link/Web Address: *
Competitor's Price: * $ *Please include shipping/handling charges
Additional Comments:  

Terms & Conditions:

 
    I have read and accept the Terms & Condition
 
   

Send to friend

: *
: *
: *
 
 

Customer feedback

There have been no reviews