Extreme PSI :: Forced Induction :: Xona Rotor Turbochargers :: Xona Rotor XR95-69S Turbocharger : 500-1000 HP (95lb/min) *ULTRA HIGH FLOW TURBINE WHEEL*

Follow us:
FacebookTwitterInstagramLinkedinGoogle PlusYoutube


ACT SALE! 30% OFF MSRP ON ALL ADVANCED CLUTCH PRODUCTS WHILE SUPPLIES LAST!

USE COUPON CODE "TAX2024" DURING CHECKOUT FOR AN ADDITIONAL 5% OFF ON YOUR ENTIRE ORDER.
<<ADDITIONAL TERMS APPLY>>

Xona Rotor XR95-69S Turbocharger : 500-1000 HP (95lb/min) *ULTRA HIGH FLOW TURBINE WHEEL* #32967

Xona Rotor XR95-69S Turbocharger : 500-1000 HP (95lb/min) *ULTRA HIGH FLOW TURBINE WHEEL* #32967

Xona Rotor XR95-69S Turbocharger : 500-1000 HP (95lb/min) *ULTRA HIGH FLOW TURBINE WHEEL*
 
(0 reviews)  

XR 95•69S (500-1000 horsepower; 95lb/min)

Components Details

  • Compressor Wheel - 68mm/94mm inducer/exducer diameter.
  • Turbine Outlet - 69mm diameter.
  • 95 lb/min max compressor mass flow.
  • 500-1000 horsepower applications.
  • Next-Generation UHF Turbine
  • Dual-Row Ball Bearing Cartidge
  • CNC-Machined Billet Stainless Steel Center Housing
  • Dual Piston Rings
  • Integrated oil Filter and Modular Oil Drain
  • Modular Compressor Housing
  • Compressor Housing Options: X3C (4.00" Ported Inlet / 2.50" Outlet) / X4C (4.00" Ported Inlet / 2.50" Outlet)

Product Information

UHF Turbine Wheel

Next-Generation Turbine Aero

Xona Rotor’s second-generation turbine wheel has arrived. Known as UHF (Ultra High Flow), its mission was to maximize flow capacity and raise efficiency.

UHF is Xona Rotor’s most advanced wheel yet. Among other details, UHF’s patent pending splitter-blade design allowed the blade loading to be fine-tuned in order to achieve its performance objectives.

Turbine design is a multi-variable juggling act. One feature that heavily influences a turbine’s mass flow “swallowing capacity” is the throat region located near the exit of the wheel. An effective method to increase the throat area is to decrease the number of blades. While reducing blade count tends to increase the turbine’s flow capacity, efficiency typically suffers.

Introducing splitter blades provides an elegant solution to the trade-off between flow and efficiency. The splitter blades alleviate the blockage in the throat area while preserving the fluid momentum at the wheel inlet.

The result is that UHF has the swallowing capacity of a low blade-count turbine with the efficiency of a high blade-count configuration. Its improvements were observed analytically, validated experimentally on a gas stand and then confirmed in on-vehicle testing.

Why Flow Capacity Matters

So why all this effort to maximize the turbine’s flow capacity? For a given engine operating point – say, full boost near redline – a higher-flowing turbine operates at reduced expansion ratio than a lower-flowing turbine. The lower expansion ratio translates directly to reduced exhaust manifold pressure (“EMAP”).

Lower EMAP means more engine power – the engine’s pumping work is reduced and volumetric efficiency improves. If the engine’s valve events (i.e., overlap) and ignition timing are modified to take advantage of the reduction in EMAP, further gains can be reaped. In the bargain, with reduced EMAP, the engine becomes less knock-sensitive and less prone to overheating.

Variable-Preload Ball Bearing Cartridge

Engineered for Life

Xona Rotor’s ball bearing system is unique. We spared no expense in its specification, starting with a high-precision ABEC 7 angular contact dual-row ball bearing cartridge. Its M62 tool steel races and silicon nitride ceramic balls deliver the highest possible load capacity, and its metallic retainers won’t melt.

We didn’t stop there. By integrating a proprietary variable preload feature (US patent no. US9062595B2) to our ball bearing cartridge, we’ve achieved a best-of-all-worlds scenario.

In a turbocharger, the correct bearing preload is a moving target. The pressures acting on the turbine and compressor wheels are often unbalanced, which generates a variable thrust (axial) load through the turbine shaft. This thrust load is exerted on one row of balls in the bearing.

To maintain contact of the unloaded row of balls to the races, a certain amount of preload is required. Insufficient preload can cause the unloaded row of balls to slide and skid on their respective races, generating fretting wear on the races that results in reduced life. Excessive preload also accelerates wear and generates heat. Compounding this situation is that the correct amount of preload is a moving target.

Xona Rotor’s variable-preload system extends bearing life by seamlessly introducing additional preload when needed and less when it isn’t.

Conventional Preload Techniques Have Limitations

Typical methods to develop preload in a bearing are via a press fit or a spring force. The press fit method requires very tight axial tolerances to be held between the bearing’s inner races and opposing outer races. To maintain consistent preload, a press fit preload system relies on materials of equal coefficient of thermal expansion and uniform operating temperatures across the entire bearing system.

However, the extreme temperature excursions inherent to a turbocharger present a challenging environment for a press fit-preloaded ball bearing. The inner bearing race is typically pressed to the turbine shaft and runs hotter than the outer race, which is thermally decoupled and more directly bathed in cooling oil. Even in a water-cooled bearing housing, the temperature gradient between the outer and inner bearing races can be hundreds of degrees Fahrenheit.

Due to the difference in operating temperature between the turbine and compressor, turbocharger applications also present a significant axial temperature gradient along the bearing’s length. These temperature differentials will not allow optimum preload to be maintained for all operating conditions. Compared to a press-fit preload system, a spring-based system can maintain a more consistent preload across a wider range of temperatures, but provides lower system stiffness.

These conventional approaches to applying preload can only be optimized for a single design point. In all other cases they are either employing insufficient or excessive preload.

How Xona Rotor’s Bearing Is Different

Xona Rotor’s variable-preload system addresses the limitations of conventional bearing systems. It harnesses the oil pressure delivered to the bearing housing to selectively apply preload to the rotating group as needed. It compensates for the variations in preload induced by thermal expansion and can vary preload as a function of rotational speed. This patented system is exclusive to Xona Rotor.

Unlike some ball bearing turbochargers, Xona Rotor turbochargers also use the oil to hydraulically damp radial shaft motions that would otherwise compromise bearing life. The oil also damps axial motions, a feature exclusive to Xona Rotor.

Turbine Housing Choices

  • TiAL V-Band Inlet / V-Band Outlet .63 A/R External Wastegate
  • TiAL V-Band Inlet / V-Band Outlet .82 A/R External Wastegate
  • TiAL V-Band Inlet / V-Band Outlet 1.03 A/R External Wastegate
  • T3 Inlet / V-Band Outlet .85 A/R External Wastegate
  • TiAL T3 Inlet / V-Band Outlet 1.06 A/R External Wastegate
  • T4 Open Inlet / V-Band Outlet .81 A/R External Wastegate
  • T4 Open Inlet / V-Band Outlet .96 A/R External Wastegate
5%
Details
 
Ships in 2-4 weeks
SKU
Retail price: $2168.00
Our price:
$2059.60
Options
Compressor Cover
Turbine Housing
Quantity

PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.

Prop65 WARNING: Cancer and Reproductive Harm. (www.p65warnings.ca.gov)

Related products

TiAL Sport 006275 -4AN Male to Male (7/16 x 24) Inline Oil Restrictor (Available in .020", .030", .040" Orifice)
Availability
Ships in 24 hours
SKU TL-001790
Our price: $17.22
Turbo Fitting
 
Quantity   


 

Price match request form

Have you seen this product at a lower price elsewhere? If so, please give us a chance to match or beat it! We will respond to your request promptly!
Your Name: *
Email: *
Phone:  
Competitor's Link/Web Address: *
Competitor's Price: * $ *Please include shipping/handling charges
Additional Comments:  

Terms & Conditions:

 
    I have read and accept the Terms & Condition
 
   

Send to friend

: *
: *
: *
 

Customer feedback

There have been no reviews