Extreme PSI :: Engine :: Oil Systems :: Oil Catch Cans :: Mishimoto Baffled Oil Catch Can (PCV Side): Ford Focus RS 2016+

Follow us:
FacebookTwitterInstagramLinkedinGoogle PlusYoutube

Mishimoto Baffled Oil Catch Can (PCV Side): Ford Focus RS 2016+ #31404

Mishimoto Baffled Oil Catch Can (PCV Side): Ford Focus RS 2016+ #31404

Mishimoto Baffled Oil Catch Can (PCV Side): Ford Focus RS 2016+
 
(0 reviews)  

The Mishimoto Focus RS Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield very little accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Ford Focus RSs on the road. The Mishimoto Focus RS catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit silicone hoses that connect the catch can with the crankcase and intake manifold. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location, right next to the engine’s oil drain plug! Two plastic, 3/8” barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!

  • Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter
  • Filters and can are fully serviceable
  • Mishimoto Lifetime Warranty
  • Application specific bracket mounts
  • Black hoses come pre-molded for reliable install
  • Catch Can conveniently located next to the transmission
  • Billet 6061 aluminum sealed can
  • Defends intercooler, intake system, and essential components from oil blow-by
  • Helps reduce carbon build-up on the intake valves
  • Helps maintain proper octane levels to reduce potential detonation
  • Internal air diverter turbulates air longer to improve oil separation

Tech Specs

Overall Height 3.8"

Overall Diameter 2.5"

Inlet 3/8" NPT

Outlet 3/8" NPT

Drain Plug Thread Size 3/8" NPT

Capacity 2 fl oz

Assembled Weight 0.9 lbs

Purchase Includes (1) Application Specific Mounting Bracket
(1) Black, Anodized 6061 Aluminum Catch Can
(2) Direct-Fit Hoses
(2) Plastic Barbed Fittings
(4) Worm-Gear Clamps
(1) Air Diverter
(1) Internal Baffle & Rod
(1) 3/8" NPT Plug
(1) Large O-Ring Mounting Hardware
(1) Drain Kit
Mishimoto Lifetime Warranty

Fits 2016+ Ford Focus RS

Engine Codes 2.3L EcoBoost

Material 6061 Aluminum

Install Torque Specs 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Note After installation, Mishimoto recommends checking the contents of the baffled catch cans every 500 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

Color BK

Baffled Yes

25%
Details
 
Ships in 24 hours
SKU MMBCC-RS-16PBE
Retail price: $285.00
Our price:
$213.75
Want this item shipped out today, August 20? Order within the next 13 hrs 13 mins.
Quantity

PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.

Prop65 WARNING: Cancer and Reproductive Harm. (www.p65warnings.ca.gov)

 

Price match request form

Have you seen this product at a lower price elsewhere? If so, please give us a chance to match or beat it! We will respond to your request promptly!
Your Name: *
Email: *
Phone:  
Competitor's Link/Web Address: *
Competitor's Price: * $ *Please include shipping/handling charges
Additional Comments:  

Terms & Conditions:

 
    I have read and accept the Terms & Condition
 
   

Send to friend

: *
: *
: *
 
 

Customer feedback

There have been no reviews