ISC V2 Basic Coilover (Track/Race Valving):
The ISC V2 Basic coilover has all the great features of the ISC
V2 N1, but has rubber isolated top mounts instead of a camber
plate/pillowball application in the front. Many street
enthusiasts may not need to have adjustable camber plates, so
the ISC V2 Basic was made in order to simplify the product and
eliminate any feature that may not be used for your average
street car that is not going for track performance or aggressive
camber/stance. This also allows us to offer the ISC V2 Basic
coilover at a lower price point to our customers without
sacrificing quality.
Spring Perch Isolator Pads: Revised hardened spring perch
isolator pads reduce friction, allowing for more efficient
preload adjustment and a longer product lifespan. Copper based
anti-seize lubricant now included for coilover
setup/installation
Single Cylinder Mono-tube Design
Mono-tube damper with high pressure nitrogen. Larger cylinder
and piston design to advance driving stability and dexterity.
Threaded portion of shaft is powder coated then salt spray
coated for optimum street durability (we suggest also using anti
seize or other protective products when you install your
coilovers for even further protection from the elements if you
are exposed to snow and salt).
Valving Option:
ISC Suspension offers
three valving options to choose from, street comfort, street
sport, and track race.
Track Race Valving
This coilover kit
features Track Race valving which is our most aggressively
valved and is suggested for road course,
slammed show cars,
and some form of drifting. If you are installing these coilovers
on a dedicated weekend track car, this option is for you!
ISC also offers custom valving, please contact for an
accurate ETA.
Certification
ISO9001:2000R Certified
ARTC Certified
32-Way Damping Adjustablitiy
Rebound/Compression adjusted in unison via 32-way adjustment
knob
Basic Upper Top Mount
T6061 anodized aluminum top plate with isolated rubber bushing
for better road compliance
Piston Design
High rigidity steel piston rods. Meets with race/sport
standards. Shafts are valved according to the spring rate. A
shock dyno is used to ensure quality and consistent results.
ISC Springs
Made from high quality SAE9254 steel. Dyno tested over
500,000 times on compression inspection with less than 5%
deformation.
Fully customizable spring rates (spring rates vary depending
on application, custom spring rates are available).
Ride Height Adjustable
Full length height adjustability of up to 3 inches on most
applications. High quality T6061 aluminum alloy used for all
adjustment locks to provide a lightweight design that holds
spring and vehicle down force.
Bound Adjustable with Separate Spring Locks
Preload is separate from ride height; the lower you go, the ride
quality stays the same.
Warranty:
All ISC Basic Coilovers are backed by our industry leading
limited lifetime warranty!