Follow us:
GSC Power-Division billet S2 cams for the VVTI Toyota Supra 2JZ-GTE. The only forged billet core *** VVTi Camshafts on the market. The S2 profile is designed for those running a large single turbo, turbos larger than 71mm typically. These cams will not have bottom end losses over our S1 cams on larger frame turbos. Gains of 60-100 WHP (depending on turbo) have been seen by simply bolting the S2 cams in and reshimming. These cams require upgraded valve springs.
Install Note:
It is necessary to inspect the S2 profile in your VVTi cylinder head for casting clearance prior to running. With the higher lift and the OEM castings verying, some require clearancing of the bucket bores and outer cylinder head casting to allow for the cam to spin freely and allow for enough room to not scrap oil from lobes . Please maintain 0.02" (0.5mm) clearance from the cylinder head casting.
Specs
Intake ADV Duration: 274° Intake Duration @ 0.040": 239° Intake Peak Lift: 10.20mm Intake Center Line: Variable
Exhaust ADV Duration: 274° Exhaust Duration @ 0.040": 240° Exhaust Peak Lift: 10.50mm Exhaust Center Line: 118°
Terms & Conditions:
ContactExtreme PSI 1553 Winchester Road Unit C Bensalem, PA 19020 215-244-4295 Fax: 215-244-4297 Sales: [email protected] Tech: [email protected] Tracking: [email protected] Mon - Fri: 9AM - 5:00PM (EST) Saturday: Closed Sunday: Closed
Sign up for our Newsletter