DSM JB Black

• Compressor wheel - 82HTZ
• Flow rating - 71LB per minute
• CW Measurements - 59.1MM Inducer / 82MM Exducer
• TW Measurements - 67.3MM Inducer / 58.8MM Exducer
• Compressor Housing - 84MM Flow Advancement Port Cover
• Turbine Housing - FP 8CM
• CHRA - FP Journal Bearing
• Oil Line - Not Included

The FP Black features our 82MM HTZ wheel rated at 71LB a minute which has produced over 600WHP in the EVO community. Spinning the compressor wheel is our clipped 67MM turbine wheel stuffed into an 8CM turbine housing. This turbo is available internally gated but if you have an O2 housing setup for external you can bolt it right up to this turbo, no custom O2 housing required.

This turbo requires that oil be fed off the filter housing which can be accomplished by purchasing our 1G Oil Supply Line.
For all of our journal bearing turbos we recommend a high quality oil see below for our oiling information sheet.

Forced Performance Oiling Recommendations.