Follow us:
ACT SALE! 30% OFF MSRP ON ALL ADVANCED CLUTCH PRODUCTS WHILE SUPPLIES LAST!
Normally Aspirated Specification Intended for fully built engine. Extensive modifications, high compression pistons and tuning recommended. Requires kit BC0010 or BC0010S.
Advertised Duration: 310° int 308° exh Duration @ .050": 260° int 254° exh Valve Lift (inches): .496" int .496" exh Valve Lift (mm): 12.60 int 12.60 exh Valve Lash (inches): .006" int .008" exh
IMPORTANT INFORMATION: Do not use impact wrench/gun to torque cam gear to camshaft.Torque cam gear bolt to 22 ft lbs. Aftermarket cams are chilled cast and require a lesser torque value than the OEM/factory steel cams. If using aftermarket gears, make certain the cam gear bolt is able to engage 3 to 4 threads into the body of the cam. Thicker gears will cause the cam bolt to only engage the threads in the snout, increasing the chance of breakage.
Terms & Conditions:
ContactExtreme PSI 1553 Winchester Road Unit C Bensalem, PA 19020 215-244-4295 Fax: 215-244-4297 Sales: [email protected] Tech: [email protected] Tracking: [email protected] Mon - Fri: 9AM - 5:00PM (EST) Saturday: Closed Sunday: Closed