Extreme PSI :: Electronics :: Scan & Diagnostic Tools :: AEM Universal AQ-1 OBD2 Data Logger

Due to COVID-19 outbreak, we are closing all retail pick up until further notice. Orders must be placed online or over the phone for mail-in order only.

Follow us:
FacebookTwitterInstagramLinkedinGoogle PlusYoutube

We are experiencing higher than average order volume and this may cause delays on shipments.
In addition, there are delivery days with US Post Office and UPS shipments due to the pandemic. We apologize for any inconvenience.

AEM Universal AQ-1 OBD2 Data Logger #32836

AEM Universal AQ-1 OBD2 Data Logger #32836

AEM Universal AQ-1 OBD2 Data Logger
 
(0 reviews)  

The AQ-1 OBDII Data Logger includes an onboard 3-axis accelerometer and is expandable through eight supplied analog inputs, three switched digital inputs, AEMnet CAN bus, and an RS232 serial connection. These allow you to add specific channels that may not be present on the OBDII datastream including:

Four 0-5V analog inputs with software selectable 2.2k pull-up resistor for thermistor (temp) sensors. 0-5v examples: AFR, Boost, Boost before/after the intercooler, MAP, Exhaust Backpressure, Crankcase Pressure, Fuel Pressure, Oil Pressure, Clutch Pressure, Brake Pressure, Shock Travel. Thermistor examples: Air Temp, Coolant Temp, EGT, Trans Temp
Four 0-5V/0-16.5V analog or Frequency inputs for all of the above plus RPM, Driveshaft Speed, Wheel Speed and Turbo Speed
Three switched digital inputs for Clutch Switch, Line Lock, Nitrous Switch, Line Lock, etc.
RS232 Serial connection for GPS, older AEM engine management systems that transmit data through serial, etc.
AEMnet CAN bus for daisy chaining x-Series Wideband Controllers and performance gauges, 4-Channel Wideband AFR Controller and Wideband Failsafe gauges, Vehicle Dynamics Module to add GPS and gyroscope, or Infinity ECU, Series 2 or EMS-4 EMS systems (future upgrade path)


AEM's AQ-1 Setup Software is intuitive and easy to use. Configuring the OBDII data is as simple as connecting permanent power, switched power and ground, connecting the OBDII plug and connecting the AQ-1 OBDII Data Logger to the vehicle. On average 20-40 channels of data are transmitted. Simply select the channels you wish to log from the data stream, set the logging rate, name the channels if they are not already named and it is ready to go.

The setup screen is broken into a Navigation Tree for your available input channels, Device Info area for data rate and available memory, a Status Bar and a Center Pane to enable and name available logging channels. Setting logging conditions, channel options, calibration data, lap beacons, reading battery voltage, configuring the accelerometer and serial input and more are found in easily navigable subpages.

The inclusion of an AEMnet CANbus input allows for the addition of multiple channels from AEMnet equipped devices through a simple one plug connection. Adding GPS for track mapping with a Vehicle Dynamics Module (VDM), wideband AFR, pressure or temp data from x-Series Digital Performance Gauges, individual cylinder AFR from 4-Channel Wideband Controllers, engine data from an Infinity ECU or Series 2/EMS-4 Programmable Engine Management System and more is all possible without the need to wire additional inputs into the unit.

AEMdata analysis software features advanced 3D graphics and a user-friendly interface. It allows users to review and playback vehicle, driver or engine data and overlay this data using charts, dash displays, gauges, or custom displays that you create, or you can select pre-defined templates. All channels are listed in the AEMdata set up menu. Users simply drag and drop the channel that they want to analyze into the window and it will display. AEMdata has powerful features including custom math channels, x/y plots and histograms, stage or circuit modes and more, all aimed at making sure you get the most out of your data. Track mapping is achieved through GPS or a combination of vehicle speed and accelerometer data, and adding data overlays to HD video is possible using the software's powerful video encoding feature.

Features:

Reads/logs channels from the OBDII port of 2008-up vehicles!
All data (OBDII, sensors, daisy-chain) saved to single log file with real-time clock!Reads and clears trouble codes
Easy to set up using intuitive free Setup software
Four analog inputs for measuring frequency (RPM), 0-5 V or 0-16.5 V
Four 0-5 V analog inputs with optional pullup resistor for RTD/Thermistor-style sensor
Three switched digital inputs, 16.5 V MAx
AEMnet connection included for easy connection to AEMnet enabled devices
RS-232 serial input included for adding NMEA0183 GPS device
Internal 3-axis accelerometer (+/- 4g MAx)
Logging rates of up to 1000 samples/second per channel
8GB removable SD card included for log files (Up to 32GB compatible)
Compact size (4.8" x 4.55" x 1.44") and weather resistant when included protective outer boot is used
Track mapping capability
Data downloadable via USB port on the AQ-1, weatherproof USB bulkhead in harness or by pulling the SD card
Free AEMdata analysis software with HD video encoding for adding data overlays to videos
28%
Details
 
Ships in 24 hours
SKU AEM-30-2501
Retail price: $624.98
Our price:
$449.98
Options
Want this item shipped out today, June 5? Order within the next 1 hrs 2 mins.
Optional AQ-1 OBD2 96in Flying Lead Wiring Harness
Quantity

PROPOSITION 65
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.

Prop65 WARNING: Cancer and Reproductive Harm. (www.p65warnings.ca.gov)

 

Price match request form

Have you seen this product at a lower price elsewhere? If so, please give us a chance to match or beat it! We will respond to your request promptly!
Your Name: *
Email: *
Phone:  
Competitor's Link/Web Address: *
Competitor's Price: * $ *Please include shipping/handling charges
Additional Comments:  

Terms & Conditions:

 
    I have read and accept the Terms & Condition
 
   

Send to friend

: *
: *
: *
 
 

Customer feedback

There have been no reviews