Extreme PSI :: Turbochargers & Kits :: Xona Rotor :: Xona Rotor XR95-67 Turbocharger : 700-950 HP (95lb/min) with TiAL Stainless Steel V-Band Inlet/Outlet Housing **MAY SPECIAL**

Follow us:
FacebookTwitterInstagramLinkedinGoogle PlusYoutube

Extreme PSI will be closed on Monday, May 29th in observance of Memorial Day. We will also be closed at 4:00PM EST on Friday, May 26th.

Xona Rotor XR95-67 Turbocharger : 700-950 HP (95lb/min) with TiAL Stainless Steel V-Band Inlet/Outlet Housing **MAY SPECIAL** #31897

Xona Rotor XR95-67 Turbocharger : 700-950 HP (95lb/min) with TiAL Stainless Steel V-Band Inlet/Outlet Housing **MAY SPECIAL** #31897

Xona Rotor XR95-67 Turbocharger : 700-950 HP (95lb/min) with TiAL Stainless Steel V-Band Inlet/Outlet Housing **MAY SPECIAL**
(0 reviews)  

XR 95.•67 700-950 horsepower; 95lb/min)

Components Details

  • Compressor Wheel - 67.7-94mm inducer/exducer diameter.
  • Turbine Outlet - 67mm diameter.
  • 95lb/min max compressor mass flow.
  • 700-950 horsepower applications.
  • Variable preload angular contact two-row ball bearing cartridge.
  • Twin gas ring seals at the compressor and turbine.
  • Highs strength, lightweight fully-machined stainless steel center housing.
  • Full hydraulic damping of the rotating assembly.
  • Integrated oil contaminate filter.
  • Metallic bearing cages.

Product Information

Xona Rotor has implemented innovative features in its XR line of performance turbochargers to enhance performance and durability. Among them is Xona’s proprietary variable-preload ball bearing cartridge system. Traditional bearing systems with insufficient preload can experience ball sliding and scuffing at high shaft speeds, leading to fretting of the bearing races and short bearing life. For expanded details on this groundbreaking improvement,

Xona Tech : Variable preload bearing system

The bearing housing itself is a fully-machined, high-strength stainless steel component with an extended water jacket. By fully surrounding the turbine seal ring land area, this advanced cooling feature combats heat soakback, preventing piston ring collapse for enhanced durability at high temperatures.

A turbocharger’s bearing system is its heart, and Xona Rotor has left nothing on the table. Xona XR turbochargers use hybrid (ceramic balls and steel races) ball bearing cartridges unlike those found elsewhere. These high-precision ABEC 7 angular contact ball bearings are made with advanced M62 high-speed powder metal steel races, silicon nitride ceramic balls and metallic ball cages. No melted ball cages here. Together these features deliver significantly elevated robustness and durability at extreme temperatures compared to conventional ball bearing systems.

Most performance turbochargers today use a single piston ring for sealing the shaft at each end. By contrast, Xona XR turbochargers employ twin rings at both the compressor and turbine ends. This feature dramatically reduces oil leakage and gas intrusion at both ends of the rotating assembly. Furthermore, since the sealing load is spread across two rings, wear rates are reduced and seal life is extended. Complementing this are large-diameter oil slingers incorporated into both ends of the shaft, further reducing splash oil at the piston ring seal location within the bearing cartridge.

The compressor register of the CHRA features an overbuilt compressor backplate and cover interface system that is very tolerant of external loads, limiting structural distortion that can lead to compressor wheel rubbing and premature failure.

At the oil inlet, XR turbochargers offer a choice of 7/16" inverted flare or straight M12xA.BC connections. Built into the oil inlet cavity of the CHRA is a large volume “last ditch” oil filter element that prevents oil contaminants from entering the bearing system and plugging oil passages within the turbocharger. At the other end of the Xona XR’s bearing housing, a modular oil drain flange allows for a variety of bolt spacing.

Turbine Housing Choices

  • TiAL V-Band Inlet / V-Band Outlet .82 A/R Extetnal Wastegate
  • TiAL V-Band Inlet / V-Band Outlet 1.03 A/R Extetnal Wastegate
Ships in 2-4 weeks
Retail price: $2099.00
Our price:
Turbine Housing

Related products

TiAL Sport 006275 -4AN Male to Male (7/16 x 24) Inline Oil Restrictor (Available in .020", .030", .040" Orifice)
Ships in 24 hours
Our price: $17.95
Turbo Fitting


Price match request form

Have you seen this product at a lower price elsewhere? If so, please give us a chance to match or beat it! We will respond to your request promptly!
Your Name: *
Email: *
Competitor's Link/Web Address: *
Competitor's Price: * $ *Please include shipping/handling charges
Additional Comments:  

Terms & Conditions:

    I have read and accept the Terms & Condition
Type the characters you see in the picture:


Send to friend

: *
: *
: *

Customer feedback

There have been no reviews