Extreme PSI :: Electronics :: Engine & Fuel Management :: ECMLink Speed Density Cable : DSM

Follow us:
FacebookTwitterInstagramLinkedinGoogle PlusYoutube

ECMLink Speed Density Cable : DSM #27533

ECMLink Speed Density Cable : DSM #27533

ECMLink Speed Density Cable : DSM
 
(0 reviews)  

This cable allows the user to install a GM or AEM IAT sensor and any GM-style MAP sensor (including our 4-bar GM-style sensor) without the hassle of cutting wires on the factory wiring harness. Just plug this harness in to your stock MAS connector and your IAT/MAP sensors and you're ready to go!

This cable connects the IAT sensor to the factory Intake Temp input pin and the MAP sensor to the factory Baro input pin. So when configuring the ECMLink software, those are the pins you'll need to specify and use.

You should read through the SD cable decision page to make sure you understand the considerations involved.

2G & EVO1-3 NOTE: This cable ties the pressure sensor directly to the ECU's baro input. The baro input of the 2G and EVO1-3 ECUs may not be compatible with some aftermarket pressure sensors, though. You can get more information on the 2G Baro and EVO1-3 Baro pages. Note that our 4-bar MAP sensor does work fine without any modifications at all. This note only applies to other sensors like the GM 3-bar and 3.3-bar sensors (and maybe others).

ADDITIONAL NOTE #1: If you order IAT and/or MAP sensors along with this cable, you will NOT receive the wiring pigtails that normally come with those sensors because this cable incorporates those connectors already. If you really need the pigtails for some reason, just put a note in your order comments during checkout and we'll include them.

ADDITIONAL NOTE #2: If for some reason you decide to cut off the GM-style MAP connector to wire in a different one, you will need to know the assignment of each wire. See below:
Pink: +5V power
Gray: Signal
White: Ground

Details
 
Ships in 24 hours
SKU
Our price:
$55.00
Options
Want this item shipped out tomorrow, January 23? Order within the next 18 hrs 25 mins.
MAF Connector Type
Quantity

Related products

Omni-Power GM Universal Map Sensor: 3 Bar *SALE*
Availability
Ships in 24 hours
SKU OP-MAP-GM-3BR
Our price: $75.00
 
Quantity   

Omni-Power GM Universal Map Sensor: 4 Bar *SALE*
Availability
Ships in 24 hours
SKU OP-MAP-GM-4BR
Our price: $81.39
 
Quantity   

GM Intake Air Temperature Sensor ( IAT / MAT / ACT ) or Manifold Air Temperature Sensor
Availability
Ships in 24 hours
SKU GM-001airtemp
Our price: $14.49
 
Quantity   

Vibrant Performance Female 3/8" -18NPT Weld Bung (1" OD)
Availability
Ships in 24 hours
SKU VIB-11172
Our price: $6.95
Select Material
 
Quantity   


 

Price match request form

Have you seen this product at a lower price elsewhere? If so, please give us a chance to match or beat it! We will respond to your request promptly!
Your Name: *
Email: *
Phone:  
Competitor's Link/Web Address: *
Competitor's Price: * $ *Please include shipping/handling charges
Additional Comments:  

Terms & Conditions:

 
    I have read and accept the Terms & Condition
   
Type the characters you see in the picture:


   

Send to friend

: *
: *
: *
 

Customer feedback

There have been no reviews