Extreme PSI :: Fuel Components :: Fuel Injectors :: Fuel Injector Clinic :: FIC 2150cc High-Z Fuel Injectors : Mitsubishi Eclipse 1990-1999 & Evolution 8 & 9 2003-2006 *With FREE Plug & Play Adapter*

Follow us:
FacebookTwitterInstagramLinkedinGoogle PlusYoutube

Holiday Closing Schedule
Friday, Dec. 22nd
Monday, Dec. 25th
Monday, Jan 1st


FIC 2150cc High-Z Fuel Injectors : Mitsubishi Eclipse 1990-1999 & Evolution 8 & 9 2003-2006 *With FREE Plug & Play Adapter* #22810

FIC 2150cc High-Z Fuel Injectors : Mitsubishi Eclipse 1990-1999 & Evolution 8 & 9 2003-2006 *With FREE Plug & Play Adapter* #22810

FIC 2150cc High-Z Fuel Injectors : Mitsubishi Eclipse 1990-1999 & Evolution 8 & 9 2003-2006 *With FREE Plug & Play Adapter*
 
(0 reviews)  

Mitsubishi DSM/Evo Fuel Injector Clinic Injector Set: 4 x 2150cc Saturated / High Impedance Injectors. Largest high impedance injector ever! Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology . Great injector for E85 applications! These injectors do not require a resistor pack or P&H drivers. Includes pigtails PGT DEN4 or add Plug & Play adaptors PADPDtoJ4. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. Resistor pack removal recommended.

This massive injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.

CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.

This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.

This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

Injector Specs:

Cylinder Quantity 4
Impedance High-Z
WHP on Gas at 43.5psi 90%DC Turbo 1044.29
WHP on Gas at 58psi 90%DC Turbo 1206.15
WHP on E85 at 43.5psi 90%DC Turbo 803.30
WHP on E85 at 58psi 90%DC Turbo 927.81
WHP on Gas at 43.5psi 90%DC NA 1253.14
WHP on Gas at 58psi 90%DC NA 1447.38
WHP on E85 at 43.5psi 90%DC NA 963.96
Fuel Pressure (psi) 43.5
Engine aspiration turbocharged

Adaptors:

Plug-N-Play Adapter: PADPDtoJ4

+10
2%
Details
 
Ships in 24 hours
SKU FIC-IS126-2150H
Retail price: $815.00
Our price:
$798.70
Options
Want this item shipped out tomorrow, December 19? Order within the next 23 hrs 27 mins.
Connectors
Quantity

 

Price match request form

Have you seen this product at a lower price elsewhere? If so, please give us a chance to match or beat it! We will respond to your request promptly!
Your Name: *
Email: *
Phone:  
Competitor's Link/Web Address: *
Competitor's Price: * $ *Please include shipping/handling charges
Additional Comments:  

Terms & Conditions:

 
    I have read and accept the Terms & Condition
   
Type the characters you see in the picture:


   

Send to friend

: *
: *
: *
 

Customer feedback

There have been no reviews