Extreme Turbo Systems 7" Street Intercooler Kit (450HP): 2G DSM #21362

The ETS 2G 7" Street Kit is hands down the best kit on the market today for
street driven vehicles. With a bar and plate core, mandrel bent piping,
stainless T-Bolt clamps, 4-ply silicone and full instructions, this kit is the
complete package.

At the heart of the kit is our premium bar and plate core. These high flowing
cores feature our exclusive offset and staggered internal fins, and louvered
external fins. This dense fin design allows our cores to be some of the most
efficient units available while still retaining good flow both on the charge air
(internal) side and the ambient (external) side. This will ensure there is
little pressure drop across the intercooler and the radiator will get LOTS of
airflow.

To complement such a core, our 2G piping has been designed with the shortest,
smoothest, and easiest to install routing possible. Our unique design routes the
piping around the core support and up over the shift linkage.  This means that
the piping in our kit is over THREE FEET shorter than some competitor's kits
that follow the stock routing.  The ETS piping comes off the turbo and expands
up to a large 2.5" diameter as soon as possible and stays 2.5" all the way to
the throttle body elbow. It is also modular so all it takes to go from a T25 to
a 14B/16G/18G or T3/T4 turbocharger is one different pipe.  This means that if
you buy the kit with the intention to upgrade your turbo later, you won't spend
an arm and a leg upgrading an upgrade.  Another unique feature to the ETS kit is
that both stock fans stay with all of the turbo options. Our trademark "J" Pipe
will route between the fans while the T3/T4 piping will clear the cross member,
something that so many other kits have problems with (The T25 kit will require
very slight trimming of the fan motor mount). The kit can also be configured for
a GM MAF and Translator if desired. In this situation we leave a 6" gap for the
GM MAF, and the BOV is moved down by the overflow tank. If you are using the
stock 2G MAF, the BOV will be up by the cruise control for easy recirculation.

The ETS Street Kit is an easy bolt-on install that makes the permanent
modifications required for other kits a thing of the past. Our detailed
instructions will walk you through all the difficult steps of the install.

Features:

*Notes:
- Automatic Cars will need to bend the
Transmission dipstick to clear the intercooler piping and relocate the oil
cooler by moving it up with the existing bolts.
- 98+ Cars will need to relocate the charcoal can.